turntable help

Zod wrote:

How hard is the RP1 to switch from 45rpm to 33rpm?

If I'm going to go with a new tech (and give up my quest to find a decent used table that can switch between 33 and 45rpm) I'm leaning slightly more toward the rega rp1 over a debut carbon.

Really easy. You lift off the platter, theres a small rubber band that you move from the 33rpm to 45rpm by adjusting it about 5mm, then place the platter back down. Ok it's not a switch but it's very simple.

Zod wrote:

reesdog wrote:

Zod wrote:

How hard is the RP1 to switch from 45rpm to 33rpm?

If I'm going to go with a new tech (and give up my quest to find a decent used table that can switch between 33 and 45rpm) I'm leaning slightly more toward the rega rp1 over a debut carbon.

Really easy. You lift off the platter, theres a small rubber band that you move from the 33rpm to 45rpm by adjusting it about 5mm, then place the platter back down. Ok it's not a switch but it's very simple.

While it doesn't sound difficult, it does sound annoying. I do find it a little annoying that modern higher end players have a distinct disdain for being automatic.

I don't think that was the case with high end retro players?

Right now I'm in a tossup between finding a used sl-1200 or the Denon 300f with a cartidge upgrade.

Yeah the reason this particular model isn't automatic for the switching between rpm's is because Rega are trying to make something considered high end more affordable. Most of what you are paying for is the tone-arm and a quality low vibration motor, a good platter, a decent cartridge etc, They've really simplified things and for the price its a really good turntable.

Though I had a look at that Denon link you showed and that looks like a pretty nice bit of kit too, good luck.

Of those two you listed, I would go with the Project Debut...

Also Project offers the Speedbox which allows you to change from 45 <

---

> 33 rpm just by hitting a button, if you're not into swapping the belt.

http://www.project-audio.com/main.php?prod=speedbox&cat=accessories

PJ_Soul wrote:

Dr. Delight wrote:

Of those two you listed, I would go with the Project Debut...

Would you mind explaining why, Dr. Delight? I'm starting to think about getting a new turbtable myself. Mine is great, but vintage, and the arm is no longer lifting at the end of the record... time for a new one I guess! Probably smarter than spending $ on a repair for a 50 year old record player - I'll put it in storage and wait until I can afford to have the thing completely restored probably. Anyway, I'd love to know what the more knowledgeable turntable enthusiasts look at when they say one is better than the other.

For this particular case, the reviews for the Project Debut have been phenomenal across the board. I would pay an extra $150 for a brand name with a reliable product.


I also happen to like the cartridge that comes with it a little better than the other TT listed. Like Salemon just said, you also do not need to keep popping off platters and swapping a belt to switch between rpm speeds.

I've been buying and fixing up turntables from flea markets since the very early 90's. If you can do it somewhere, try and test out some players for your own liking..though its not easy to find an audio store that specializes in record players. Ease of setup/use is a big thing that buyers look for in a new turntable as well.

sparky_fry wrote:

Dr. Delight wrote:

PJ_Soul wrote:

Would you mind explaining why, Dr. Delight? I'm starting to think about getting a new turbtable myself. Mine is great, but vintage, and the arm is no longer lifting at the end of the record... time for a new one I guess! Probably smarter than spending $ on a repair for a 50 year old record player - I'll put it in storage and wait until I can afford to have the thing completely restored probably. Anyway, I'd love to know what the more knowledgeable turntable enthusiasts look at when they say one is better than the other.

I would pay an extra $150 for a brand name with a reliable product.

But I guess that's what i'm debating, Is the brand name worth $150. It seems the whole point of the orbit is to make a quality TT without the brand name pricing. The lack of reviews is my only concern

Sparky, let me ask you, what kind of setup do you have as far as speakers/receiver, etc..?

sparky_fry wrote:

well I'm going to be in the market for preamp after i decide on a TT. I've been looking at

http://www.guitarcenter.com/BBE-FJB-200X-Phono-Preamp-103540886-i1155721.gc#customer-reviews

which has been posted earlier. As for speakers I'll be mostly using my set Sony MDR-V6 Headphones until I get a good set of speakers

Ok, based on that info...sounds like you are in no hurry to get the setup of your dreams..willing to take your time, I'll suggest you go with the first, cheaper one. That way you can save some money.

Now you can get your speakers/preamp, and enjoy the entire setup.
You can always upgrade any and all components of your system in the future.

Oh, also, I don't have a preamp, and don't want one if I can avoid it. I'm happy with just my receiver. I've not been clear on whether or not many new turntables NEED a preamp? Can anyone say how common or uncommon new turntables that don't require one are?

PJ_Soul wrote:

Oh, also, I don't have a preamp, and don't want one if I can avoid it. I'm happy with just my receiver. I've not been clear on whether or not many new turntables NEED a preamp? Can anyone say how common or uncommon new turntables that don't require one are?

Does the back of your receiver have a Phono input?

PJ_Soul wrote:

Dr. Delight wrote:

PJ_Soul wrote:

Oh, also, I don't have a preamp, and don't want one if I can avoid it. I'm happy with just my receiver. I've not been clear on whether or not many new turntables NEED a preamp? Can anyone say how common or uncommon new turntables that don't require one are?

Does the back of your receiver have a Phono input?

Yes.

You dont need a preamp then. Plug in and play.