framed poster thread

Options
16465676970723

Comments

  • MasterFramer
    MasterFramer Posts: 2,268
    @ nice job Master !!!

    Finally tomorrow I will take my Dusseldorf, Shark, blue Dumbgun Hawaii and Roma 96 from Sutton to frame.
    I can't wait to see it.

    I will post the pics when is done.

    Look forward to seeing them!
    10.31.93 / 10.1.94 / 6.24.95 / 11.4.95 / 10.19-20.96 / 7.16.98 / 7.21.98 / 10.31.00 /8.4.01 Nader Rally/ 10.21.01 / 12.8-9.02 / 6.01.03 / 9.1.05 / 7.15-16,18.06 / 7.20.06 / 7.22-23.06 / Lolla 07
  • Thierry Henry
    Thierry Henry Posts: 2,654
    Look forward to seeing them!


    Have you any Hampton Melbournes that you framed??
    Would like to see what you did.
    Dublin '96, '00, '06, '10
    Lisbon '06 (x2)
    Katowice '07
    London '07 '09 (x2), '10
    MSG NY '08 (x2)
    Manchester '09 '12
    Belfast '10
    PJ20 Alpine '11 (x2)
    Leeds '14
  • bigwave3
    bigwave3 Posts: 6
    how did you get the curve on the top of the mat with the ben harper? i have a nice straight mat cutter, do you use like a circle cutter and put the point like a foot below? well done
  • Recording Artist Coalition 2002, Irvine 6/2/03, Irvine 6/3/03, San Diego 6/5/03, San Diego 7/7/06, LA 7/9/06, LA 7/10/06, LA 9/30/09, LA 10/01/09, LA 10/6/09, LA 10/7/09, San Diego 10/9/09, San Diego 11/21/13, LA 11/23/13, LA 11/24/13, Seattle 12/6/13
  • MasterFramer
    MasterFramer Posts: 2,268
    I'm giving the 2 SFs to my little brother for his birthday and the EMEKs are not mine unfortunately :)
    10.31.93 / 10.1.94 / 6.24.95 / 11.4.95 / 10.19-20.96 / 7.16.98 / 7.21.98 / 10.31.00 /8.4.01 Nader Rally/ 10.21.01 / 12.8-9.02 / 6.01.03 / 9.1.05 / 7.15-16,18.06 / 7.20.06 / 7.22-23.06 / Lolla 07
  • Sharon_Hearts_PJ
    Sharon_Hearts_PJ Bristol, PA Posts: 1,383
    MasterFramer, that SF2 is one of the coolest matting jobs I've ever seen. :) Nicely done.
    *Rock and/or Roll!*
  • decides2dream
    decides2dream Posts: 14,977
    i'll be picking up my framed dusseldorf tomorrow. :D wooohooo!
    Stay with me...
    Let's just breathe...


    I am myself like you somehow


  • peanuthead
    peanuthead austin tx Posts: 35
    gfraser wrote:
    sick indeed...hope to see the neocon series...i think someone posted it before all lined up together.

    i have all 6 neocon posters framed.

    i tried to get all 6 in a single frame but the framer said it would cost extra because the matting was over-sized.

    i will post a picture soon

    p.h.
    first comes love then comes pain. let the games begin.
    '23 Fort Worth #2
    '22 Oklahoma City
    '09 Seattle
    '07- Chicago 'THE VIC'!!
    '06- st. paul'
    '06-DC'
    '04-boston'
    '00-va beach' First show of US tour
    '00-seattle' second to last show :(
    '98 hartford'
    '98 virginia beach
  • MasterFramer
    MasterFramer Posts: 2,268
    peanuthead wrote:
    i have all 6 neocon posters framed.

    i tried to get all 6 in a single frame but the framer said it would cost extra because the matting was over-sized.

    i will post a picture soon

    p.h.

    Yes it would... then they like to charge extra for additional openings... damn framers ;)
    10.31.93 / 10.1.94 / 6.24.95 / 11.4.95 / 10.19-20.96 / 7.16.98 / 7.21.98 / 10.31.00 /8.4.01 Nader Rally/ 10.21.01 / 12.8-9.02 / 6.01.03 / 9.1.05 / 7.15-16,18.06 / 7.20.06 / 7.22-23.06 / Lolla 07
  • rjwhite19
    rjwhite19 Posts: 574
    detroit looks great! and amazing job on the framing masterframer! any framed pj's that you have that just don't fit the decore anymore that you'd like to trade/sell? pm me
    Montreal 2003. Halifax 2005. EV Montreal 2008. Toronto 2009
    Toronto 2011 1 & 2 London 2013. Quebec City 2016. Ottawa 2016
    Fenway 2016 1 & 2
  • mhterrapin
    mhterrapin Posts: 99
    wow great color choice for the SF1, I couldn't decide what to do for mine but that looks perfect!
  • MasterFramer
    MasterFramer Posts: 2,268
    rjwhite19 wrote:
    detroit looks great! and amazing job on the framing masterframer! any framed pj's that you have that just don't fit the decore anymore that you'd like to trade/sell? pm me

    I'll keep that in mind... walls are getting full
    10.31.93 / 10.1.94 / 6.24.95 / 11.4.95 / 10.19-20.96 / 7.16.98 / 7.21.98 / 10.31.00 /8.4.01 Nader Rally/ 10.21.01 / 12.8-9.02 / 6.01.03 / 9.1.05 / 7.15-16,18.06 / 7.20.06 / 7.22-23.06 / Lolla 07
  • Dirty Frankk
    Dirty Frankk Posts: 4,274
    Finally some of my posters in the frame

    Justin Hampton - Ed - Visage s/n (my favorite)
    Double black frame with gold
    http://s159.photobucket.com/albums/t149/ninodu/?action=view&current=ED.jpg

    Brad Klausen - Dusseldorf 07
    Double black / red frame
    http://s159.photobucket.com/albums/t149/ninodu/?action=view&current=Dusseldorf.jpg

    Dumbgun blue Hawaii
    Blue frame
    http://s159.photobucket.com/albums/t149/ninodu/?action=view&current=Hawaii.jpg

    Ward Sutton - Roma 96 with ticket (my first PJ show)
    No price for this one
    http://s159.photobucket.com/albums/t149/ninodu/?action=view&current=Roma.jpg

    Brad Klausen - Barcelona/Shark 06
    Silver / black frame
    http://s159.photobucket.com/albums/t149/ninodu/?action=view&current=Shar.jpg
    CAN'T KEEP CRAZY MARY IN MY TREE NO WAY NOT FOR YOU. ALL THOSE YESTERDAY JEREMY is ALONE, SAD with RATS & BUGS it's HARD TO IMAGINE a JEREMY a BETTER MAN.
    LIFE WASTED, BLOOD on the PORCH, LAST KISS is a WISHLIST DEEP DOWN NOTHING AS IT SEEMS WHY GO COME BACK ALIVE SPIN THE BLACK CIRCLE and SMILE.
  • nfanel
    nfanel Posts: 2,558
    Finally some of my posters in the frame
    wow! those are some really amazing frame jobs!!
  • Well if they used what I know them to be called which is "conservation corners" then all is good... that is the best way to mount a print when matting. If they used corners and spacers you should be able to see part of the corners under the spacers. There is no reason to use them in this case though. But from what you have said thus far it sounds ok... sorry to get you worried, I just hate to hear about bad frame jobs that people pay good money for :D.


    UPDATE...

    You might remember my worries that my framer just slapped my U2 Klausen on foamboard and framed without spacers... well, it looks like that was what happened. After I called the shop and spoke to a shop employee to clarify their process and I was assured all was good, I sent an email to their website's contact page asking the same questions. Well, the owner of the shop must get the website emails because he called me and as it turns out he framed it himself thinking it was a regular concert poster and followed the instructions which were the words 'museum mount' written next to the pre-printed portion of their order form that said 'foamboard'.

    He asked me some questions about the poster, how much I paid, etc. I told him it was a limited run, that I had been to the show, and that I paid a couple hundred bucks for it and was a little irritated that my specific request seemed to be trumped by their perception that this was just a 'normal poster' and didn't have any special value.

    To make a long story short, he offered me two options without me even asking. He would find another poster and re-frame it correctly, or if he couldn't find one he would refund my money. Knowing that these are pretty rare, I was fully expecting him to call back telling me he credited my account. Well you can imagine my surprise when he called me today telling me he found a replacement (signed by Klausen!) and is going to frame it correctly this time. He spent way more than I did for my original, too. So I'm pretty impressed with his commitment to customer satisfaction.

    I'm stoked. I have to bring back my original, obviously, and I'm expecting to pay the difference between what I paid to get a mat, etc.

    So, MasterFramer... can you post a couple recommended matting arrangements that you would do for the Klaussen Hawaii print? I have no idea what will look good with this design. Frame is a dark walnut colored wood.

    http://i7.photobucket.com/albums/y263/vertiblog/U2PJPoster001.jpg

    Thanks.
    12.9.2006 Honolulu + Klausen
  • MasterFramer
    MasterFramer Posts: 2,268
    The reason he did that was because you could have taken him to small claims and gotten way more than what the poster is worth. He just bit the bullet and did the right thing as far as customer service.

    Now about matting there is no way I can really post anything exact but I can suggest that for the top mat pic something that matches the paper color... most likely a rag mat... then pick one or two accent colors that match the print colors. That's where I would start. Is he going to frame it for you for free as well?
    10.31.93 / 10.1.94 / 6.24.95 / 11.4.95 / 10.19-20.96 / 7.16.98 / 7.21.98 / 10.31.00 /8.4.01 Nader Rally/ 10.21.01 / 12.8-9.02 / 6.01.03 / 9.1.05 / 7.15-16,18.06 / 7.20.06 / 7.22-23.06 / Lolla 07
  • The reason he did that was because you could have taken him to small claims and gotten way more than what the poster is worth. He just bit the bullet and did the right thing as far as customer service.

    Now about matting there is no way I can really post anything exact but I can suggest that for the top mat pic something that matches the paper color... most likely a rag mat... then pick one or two accent colors that match the print colors. That's where I would start. Is he going to frame it for you for free as well?

    I'm not sure what it's going to cost. I'm assuming that I'll pay whatever difference there is between what I originally paid and what it would have cost with a mat and the proper mounting technique. I think that's fair, especially since I'm getting the upgrade to a signed print.

    Colors are tough on this one. Blue and orange just ruin it when I try to use those as matte colors. I already have the brown frame to match the brown in the word 'and' in the print. Using a matte the same color as the poster seems too bland.

    Wish someone could do a mock up so I can get a better visual. Would you think trying to curve the mat on the right side to stay with the contour of the design would play well?

    Does a signed print really carry that much more value?
    12.9.2006 Honolulu + Klausen
  • MasterFramer
    MasterFramer Posts: 2,268
    truthiness wrote:
    I'm not sure what it's going to cost. I'm assuming that I'll pay whatever difference there is between what I originally paid and what it would have cost with a mat and the proper mounting technique. I think that's fair, especially since I'm getting the upgrade to a signed print.

    Colors are tough on this one. Blue and orange just ruin it when I try to use those as matte colors. I already have the brown frame to match the brown in the word 'and' in the print. Using a matte the same color as the poster seems too bland.

    Wish someone could do a mock up so I can get a better visual. Would you think trying to curve the mat on the right side to stay with the contour of the design would play well?

    Does a signed print really carry that much more value?

    We'll I would just get the print from the guy and send it to me and I'll frame it up for you. Trust me on the top mat... you want the eye drawn in to the print. You try and put some color all over the place and its going to compete with the print. Thats proper design but go ahead and put a blue mat on top... its just not going to look very good at all. Good Luck
    10.31.93 / 10.1.94 / 6.24.95 / 11.4.95 / 10.19-20.96 / 7.16.98 / 7.21.98 / 10.31.00 /8.4.01 Nader Rally/ 10.21.01 / 12.8-9.02 / 6.01.03 / 9.1.05 / 7.15-16,18.06 / 7.20.06 / 7.22-23.06 / Lolla 07