I don’t know, I just think Funko pops are pretty damn cool. I’ve never been one to hang all my PJ posters, have every show I’ve been except for that damn Dallas. Maybe one day.. Music is important to our lives....
1998 Dallas (7/5) 2006 San Fran (7/15,7/16) 2009 San Fran (8/28) 2010 Bristow (5/13) NY (5/21) 2011 Alpine Valley (9/3,9/4) 2012 Missoula (9/30) 2013 Chicago (7/19) Pittsburgh (10/11) Buffalo (10/12) Baltimore (10/27) Dallas (11/15) 2014 Austin (10/12) Memphis (10/14) St. Paul (10/19) Milwaukee (10/20) Denver (10/22) 2016 Ft. Lauderdale (4/8) Miami (4/9) Hampton (4/18) Philly (4/28,4/29) NY (5/1,5/2) 2018 Seattle (8/10) Missoula (8/13) 2022 Nashville (9/16) E.V. - 2008 Berkeley (4/8) 2012 Austin (11/9,11/12) Temple of the Dog - 2016 Upper Darby
I might just go IKEA and glue down wood strips for backstops. No backing drives me bonkers.
I know there is a company that makes backings. I get ads for them occasionally on my IG.
Someone may have already mentioned this, but I cut pool noodles down to the width of the shelf. They are a tight fit that I push into the back of each shelf. And the width is perfect, that all my records pushed all the way in are exactly at the edge.
Not today Sir, Probably not tomorrow.............................................. bayfront arena st. pete '94
you're finally here and I'm a mess................................................... nationwide arena columbus '10
memories like fingerprints are slowly raising.................................... first niagara center buffalo '13
another man ..... moved by sleight of hand...................................... joe louis arena detroit '14
for anyone using a Kallax, did you add a backing board for strengthening? I just bought a 2x4 unit that I am planning on mounting vertically.
for as light as it is, the way its put together gives strength. dowel pins hold all the interior components.
Thanks. I went with the Kallax even though it was a little more expensive hoping it was better made (and stronger) than the ones that other places sell.
I might just go IKEA and glue down wood strips for backstops. No backing drives me bonkers.
I know there is a company that makes backings. I get ads for them occasionally on my IG.
Someone may have already mentioned this, but I cut pool noodles down to the width of the shelf. They are a tight fit that I push into the back of each shelf. And the width is perfect, that all my records pushed all the way in are exactly at the edge.
I guess I need to order some pool noodles from somewhere and try this.
for anyone using a Kallax, did you add a backing board for strengthening? I just bought a 2x4 unit that I am planning on mounting vertically.
I currently have a 4x4 and it's pretty solid. Damn thing is nearly full. As my house is holder and has plaster walls I didn't wall mount it. I move it ahead an inch or so, then put a few layers of cardboard under the front left, middle, right. Gives it a slight lean into the wall (but barely) and it's rock solid.
I'm hoping I can do the same with the 4x2 I recently ordered (still questioning myself if I should of gotten the 4x3... lol.
for anyone using a Kallax, did you add a backing board for strengthening? I just bought a 2x4 unit that I am planning on mounting vertically.
I currently have a 4x4 and it's pretty solid. Damn thing is nearly full. As my house is holder and has plaster walls I didn't wall mount it. I move it ahead an inch or so, then put a few layers of cardboard under the front left, middle, right. Gives it a slight lean into the wall (but barely) and it's rock solid.
I'm hoping I can do the same with the 4x2 I recently ordered (still questioning myself if I should of gotten the 4x3... lol.
Thanks. I have a 16 month old grandson who is at the house a lot, so I am going to secure it to a wall stud with a bracket.
for anyone using a Kallax, did you add a backing board for strengthening? I just bought a 2x4 unit that I am planning on mounting vertically.
I currently have a 4x4 and it's pretty solid. Damn thing is nearly full. As my house is holder and has plaster walls I didn't wall mount it. I move it ahead an inch or so, then put a few layers of cardboard under the front left, middle, right. Gives it a slight lean into the wall (but barely) and it's rock solid.
I'm hoping I can do the same with the 4x2 I recently ordered (still questioning myself if I should of gotten the 4x3... lol.
Thanks. I have a 16 month old grandson who is at the house a lot, so I am going to secure it to a wall stud with a bracket.
mounting brackets are supplied with pre-drilled holes in the unit for placement.
Not today Sir, Probably not tomorrow.............................................. bayfront arena st. pete '94
you're finally here and I'm a mess................................................... nationwide arena columbus '10
memories like fingerprints are slowly raising.................................... first niagara center buffalo '13
another man ..... moved by sleight of hand...................................... joe louis arena detroit '14
for anyone using a Kallax, did you add a backing board for strengthening? I just bought a 2x4 unit that I am planning on mounting vertically.
I currently have a 4x4 and it's pretty solid. Damn thing is nearly full. As my house is holder and has plaster walls I didn't wall mount it. I move it ahead an inch or so, then put a few layers of cardboard under the front left, middle, right. Gives it a slight lean into the wall (but barely) and it's rock solid.
I'm hoping I can do the same with the 4x2 I recently ordered (still questioning myself if I should of gotten the 4x3... lol.
Thanks. I have a 16 month old grandson who is at the house a lot, so I am going to secure it to a wall stud with a bracket.
mounting brackets are supplied with pre-drilled holes in the unit for placement.
Bonus! I haven't put it together yet. It is still in the box in the back of our vehicle.
I made these out of pressed wood and stained them to match the shelf. Flipping is much more satisfying the other method I will be making a few more in the coming weeks.
The other thing I did was put a small block of wood in the back of each cubby, glued down. It prevents the records from sliding back. Now they all stay aligned.
I made these out of pressed wood and stained them to match the shelf. Flipping is much more satisfying the other method I will be making a few more in the coming weeks.
The other thing I did was put a small block of wood in the back of each cubby, glued down. It prevents the records from sliding back. Now they all stay aligned.
Nice! I like your dividers on the shelf too. Are those actual records?
I made these out of pressed wood and stained them to match the shelf. Flipping is much more satisfying the other method I will be making a few more in the coming weeks.
The other thing I did was put a small block of wood in the back of each cubby, glued down. It prevents the records from sliding back. Now they all stay aligned.
Nice! I like your dividers on the shelf too. Are those actual records?
Haha, yeah. I go buy a handful of dollar records and glue them 1/3 up to the sleeve. Makes great dividers. Good eye!
I made these out of pressed wood and stained them to match the shelf. Flipping is much more satisfying the other method I will be making a few more in the coming weeks.
The other thing I did was put a small block of wood in the back of each cubby, glued down. It prevents the records from sliding back. Now they all stay aligned.
Nice! I like your dividers on the shelf too. Are those actual records?
Haha, yeah. I go buy a handful of dollar records and glue them 1/3 up to the sleeve. Makes great dividers. Good eye!
Hmm, I might need to steal (borrow) your idea and get a little crafty.
I made these out of pressed wood and stained them to match the shelf. Flipping is much more satisfying the other method I will be making a few more in the coming weeks.
The other thing I did was put a small block of wood in the back of each cubby, glued down. It prevents the records from sliding back. Now they all stay aligned.
Nice! I like your dividers on the shelf too. Are those actual records?
Haha, yeah. I go buy a handful of dollar records and glue them 1/3 up to the sleeve. Makes great dividers. Good eye!
Hmm, I might need to steal (borrow) your idea and get a little crafty.
@mrussel1 what are you using as a marker? silver sharpie?
Not today Sir, Probably not tomorrow.............................................. bayfront arena st. pete '94
you're finally here and I'm a mess................................................... nationwide arena columbus '10
memories like fingerprints are slowly raising.................................... first niagara center buffalo '13
another man ..... moved by sleight of hand...................................... joe louis arena detroit '14
I made these out of pressed wood and stained them to match the shelf. Flipping is much more satisfying the other method I will be making a few more in the coming weeks.
The other thing I did was put a small block of wood in the back of each cubby, glued down. It prevents the records from sliding back. Now they all stay aligned.
Nice! I like your dividers on the shelf too. Are those actual records?
Haha, yeah. I go buy a handful of dollar records and glue them 1/3 up to the sleeve. Makes great dividers. Good eye!
Hmm, I might need to steal (borrow) your idea and get a little crafty.
@mrussel1 what are you using as a marker? silver sharpie?
Yes. And my wife writes them since I write like a serial killer.
I might just go IKEA and glue down wood strips for backstops. No backing drives me bonkers.
i have this same issue. records constantly pushing other records back, getting "lost" so to speak. especially if they have sleeves.
Look at my picture a few comments above. I buy those Glorious boxes. Perfect for the problem you have ( had that too ) in a Ikea storage ( wich i also have ) and for the Vault releases en boxes
I think a pool noodle will be too big and cause your PJ vaults to stick out.
Possibly. If so I am only out a couple of dollars and I can look for plan b.
Also, you could always just carve a deeper section out of the pool noodle where the vaults live. Of course, that may change over time, but it would work until that happens.
Also, you can cut a pool noodle with a kitchen knife or scissors (i.e., you don't need a saw), so that might make it easier.
I'm still using Liquid Nails to fix all the molding the electricians cut while rewiring the knob and tube to be up to code. Maybe three more years, and I'll finish that job.
Comments
2012 Missoula (9/30) 2013 Chicago (7/19) Pittsburgh (10/11) Buffalo (10/12) Baltimore (10/27) Dallas (11/15)
2014 Austin (10/12) Memphis (10/14) St. Paul (10/19) Milwaukee (10/20) Denver (10/22)
2016 Ft. Lauderdale (4/8) Miami (4/9) Hampton (4/18) Philly (4/28,4/29) NY (5/1,5/2) 2018 Seattle (8/10) Missoula (8/13) 2022 Nashville (9/16)
E.V. - 2008 Berkeley (4/8) 2012 Austin (11/9,11/12)
Temple of the Dog - 2016 Upper Darby
for as light as it is, the way its put together gives strength. dowel pins hold all the interior components.
Not today Sir, Probably not tomorrow.............................................. bayfront arena st. pete '94
you're finally here and I'm a mess................................................... nationwide arena columbus '10
memories like fingerprints are slowly raising.................................... first niagara center buffalo '13
another man ..... moved by sleight of hand...................................... joe louis arena detroit '14
Not today Sir, Probably not tomorrow.............................................. bayfront arena st. pete '94
you're finally here and I'm a mess................................................... nationwide arena columbus '10
memories like fingerprints are slowly raising.................................... first niagara center buffalo '13
another man ..... moved by sleight of hand...................................... joe louis arena detroit '14
I will be making a few more in the coming weeks.
The other thing I did was put a small block of wood in the back of each cubby, glued down. It prevents the records from sliding back. Now they all stay aligned.
what are you using as a marker? silver sharpie?
Not today Sir, Probably not tomorrow.............................................. bayfront arena st. pete '94
you're finally here and I'm a mess................................................... nationwide arena columbus '10
memories like fingerprints are slowly raising.................................... first niagara center buffalo '13
another man ..... moved by sleight of hand...................................... joe louis arena detroit '14
-EV 8/14/93
-EV 8/14/93
And it's not like the back of the storage unit will be visible.
Also, you can cut a pool noodle with a kitchen knife or scissors (i.e., you don't need a saw), so that might make it easier.
I'm still using Liquid Nails to fix all the molding the electricians cut while rewiring the knob and tube to be up to code. Maybe three more years, and I'll finish that job.