Post your stereo system!

17810121382

Comments

  • mrussel1 said:

    But it isn't copper... that's the point. It's copper clad, basically a wrap around aluminum. If you strip apart that cheaper wire, you'll see it's silver.
    99.7% copper means just that. if it's copper clad then it isn't 99.7%, no? It sounds like shenanigans are going on with copper impurities? I need to start reading the fine print on the copper wire I buy...
  • Posts: 30,955

    99.7% copper means just that. if it's copper clad then it isn't 99.7%, no? It sounds like shenanigans are going on with copper impurities? I need to start reading the fine print on the copper wire I buy...
    I think we're talking past each other. My point is I believe there is a difference in speaker wire. It's the difference between CCA and copper. I would always buy copper. It's not much more expensive and it makes sense that it would be better since copper is a better conductor than aluminum,. I don't think there is an audible difference between say... Monoprice or Mediabridge copper speaker wire vs. Monster, which has always been overpriced.
  • mrussel1 said:

    I think we're talking past each other. My point is I believe there is a difference in speaker wire. It's the difference between CCA and copper. I would always buy copper. It's not much more expensive and it makes sense that it would be better since copper is a better conductor than aluminum,. I don't think there is an audible difference between say... Monoprice or Mediabridge copper speaker wire vs. Monster, which has always been overpriced.
    Oh ok got it.

    I just never understood for the high priced stuff. I get you.
  • Tennessee Posts: 9,212
    lolobugg said:

    anyone here ever used an anti static gun for their turntable? I seem to always get a lot more pops and hiss in the winter time. wondering if this might make a difference?

    I use the Thunderon Conductive Record Brush from Sleeve City

    https://www.youtube.com/watch?v=fxO7iWdYo-c
  • BLUE RDGE MTNS Posts: 8,195
    MedozK said:

    I use the Thunderon Conductive Record Brush from Sleeve City

    https://www.youtube.com/watch?v=fxO7iWdYo-c
    Thank you so much. seems like a less expensive option. does it work pretty well for you?

    livefootsteps.org/user/?usr=446

    1995- New Orleans, LA  : New Orleans, LA

    1996- Charleston, SC

    1998- Atlanta, GA: Birmingham, AL: Greenville, SC: Knoxville, TN

    2000- Atlanta, GA: New Orleans, LA: Memphis, TN: Nashville, TN

    2003- Raleigh, NC: Charlotte, NC: Atlanta, GA

    2004- Asheville, NC (hometown show)

    2006- Cincinnati, OH

    2008- Columbia, SC

    2009- Chicago, IL x 2 / Ed Vedder- Atlanta, GA x 2

    2010- Bristow, VA

    2011- Alpine Valley, WI (PJ20) x 2 / Ed Vedder- Chicago, IL

    2012- Atlanta, GA

    2013- Charlotte, NC

    2014- Cincinnati, OH

    2015- New York, NY

    2016- Greenville, SC: Hampton, VA:: Columbia, SC: Raleigh, NC : Lexington, KY: Philly, PA 2: (Wrigley) Chicago, IL x 2 (holy shit): Temple of the Dog- Philly, PA

    2017- ED VED- Louisville, KY

    2018- Chicago, IL x2, Boston, MA x2

    2020- Nashville, TN 

    2022- Smashville 

    2023- Austin, TX x2

    2024- Baltimore

  • Tennessee Posts: 9,212
    lolobugg said:

    Thank you so much. seems like a less expensive option. does it work pretty well for you?
    Yes, works great for me. I just couldn't see spending $100 for the Milty Zerostat gun.
  • Posts: 1,394
    Ok just an update. I changed my mind last minute and went with the Yamaha 501 amp you had initially posted @mrussel1 I also decided to pony up a little extra and went with the Monitor Audio Bronze 5 speakers. So even though I didn't exactly follow your recommendations to a tee, they lead me in the right direction for myself I think.

    Current setup:

    Yamaha A-S501BL integrated amp

    Yamaha wireless Bluetooth adapter (for when I listen to Tidal via phone)

    Onkyo C-7030 CD player

    Audio Technica ATLP120 TT

    Nakamichi BX-300 cassette deck

    Monitor Audio Bronze 5 floorstanders
  • Auckland, NZ. Posts: 1,981
    bflynn1 nice stuff there bro, just did a search on the Yamaha amp and it looks and sounds like a beauty, perfect for a 2-channel system. Very happy to hear you went with the Monitor Audio Bronze 5's, I have the same exact floor-standers and they are awesome, they aren't too big, which I like, they look really nice and the sound is exceptional. They take a little while to burn in, maybe 20 hours at least of playback, but once they are, wow they sound fucking good. Don't get me wrong, they still sound sweet out of the box, but there definitely is a burn in period where you will notice a significant upgrade of the sound.

    Don't forget to toe the speakers in a little and give them some space off any back wall, this will make the listening experience if you're sitting right infront of them that much better. I used the round bits of foam they provide in the back port to reduce the bass a little as the room I have them in isn't huge.

    I think you're going to be one happy punter, hope to hear your thoughts on the set-up soon!
    A wop bop a loo bop a lop bam boom.
  • Posts: 30,955
    bflynn1 said:

    Ok just an update. I changed my mind last minute and went with the Yamaha 501 amp you had initially posted @mrussel1 I also decided to pony up a little extra and went with the Monitor Audio Bronze 5 speakers. So even though I didn't exactly follow your recommendations to a tee, they lead me in the right direction for myself I think.

    Current setup:

    Yamaha A-S501BL integrated amp

    Yamaha wireless Bluetooth adapter (for when I listen to Tidal via phone)

    Onkyo C-7030 CD player

    Audio Technica ATLP120 TT

    Nakamichi BX-300 cassette deck

    Monitor Audio Bronze 5 floorstanders

    Nice setup! Did you get it all in yet or still waiting? Let us know how it all sounds together.

    And Rees is absolutely right.. don't forget to toe them. Creates much better imaging that way. And don't forget to listen in pure mode!
  • Auckland, NZ. Posts: 1,981
    Photo's if you can too please!
    A wop bop a loo bop a lop bam boom.
  • Posts: 1,394
    Thanks guys! Everything is in. I'm setting it all up tomorrow. Pics to follow!
  • Posts: 3,192
    edited December 2016
    I have been a big fan of Onkyo CD players. Great bang for the buck.
    If hope can grow from dirt like me, it can be done. - EV
  • Tennessee Posts: 9,212
    dudeman said:

    I have been a big fan of Onkyo CD players. Great bang for the buck.

    Yep, the Onkyo C-7030 CD player is an exceptional player for the money.
  • MedozK said:

    Yep, the Onkyo C-7030 CD player is an exceptional player for the money.
    Silly question... Or maybe not?

    How can a CD player be a better quality sounding than another? It's digital.
  • Posts: 1,394
    image

    @mrussel1 @reesdog

    All done and it sounds fantastic! Can't wait to break in the speakers some more.
  • Posts: 3,192

    Silly question... Or maybe not?

    How can a CD player be a better quality sounding than another? It's digital.
    Circuit topology, quality of components, build quality, DAC....these all contribute to the experience of the end listener.
    If hope can grow from dirt like me, it can be done. - EV
  • Auckland, NZ. Posts: 1,981
    bflynn1 said:

    image

    @mrussel1 @reesdog

    All done and it sounds fantastic! Can't wait to break in the speakers some more.

    Nice and well done, but the photo didn't show up...

    A wop bop a loo bop a lop bam boom.
  • Posts: 1,394
    reesdog said:

    Nice and well done, but the photo didn't show up...

    I was afraid of that. First time trying to post a pic.
  • Posts: 1,394
    edited December 2016
    There we go.
    image
    Post edited by bflynn1 on
  • Posts: 30,955
    Looks great! Can you widen the speakers? You'll get a much better sound stage.

Welcome!

It looks like you're new here. Sign in or register to get started.