My Packard-Hell surprises me!

disconnected

I am (...) surprised by my Packard-Hell PC. It's suddenly ask me to start up in safe mode..... I have no (...) clue why...............

Once it suddenly shut down and restarted. I scanned on spyware/mallware and stuff. Also scanned on virus with Symantec Anti Virus and AGV.... And: I have no (...) clue why...............

Any ideas?

Note: (...) are words often used by Gordon Ramsay

Jamal

Does it do this often?
might just be windows, so a reformat might help (usually does)
might be your RAM or RAM-bus too
could be lots of things

does it ever beep while booting? (not just once, but multiple times or nonstop)

disconnected

can we speak in dutch?
Reformatting: opnieuw windows installeren?
Hoe zit het dan met een serial? Ik heb alleen via een kennis een orginele windows xp cd-rom gekregen.

Hij piept nooit tijdens het starten.

Jamal

disconnected wrote:

can we speak in dutch?
Reformatting: opnieuw windows installeren?
Hoe zit het dan met een serial? Ik heb alleen via een kennis een orginele windows xp cd-rom gekregen.

Hij piept nooit tijdens het starten.

Hmmm, mja, een serial kan je wel vinden...
toch best eens RAM-test runnen. Zoek eens naar "memtest" en laat het programma een paar keer lopen op je pc. Dit test of je geheugen al dan niet corrupt is.
Als het corrupt is, kan je best gewoon een nieuw latje kopen.
Ligt het niet aan je geheugen, dan best eens windows herinstalleren (helemaal opnieuw ja )
Als het dan niet is opgelost hier ng eens komen vragen...

Misschien is het wel het beste als we deze conversatie in het engels verderzetten, om anderen de kans te geven ook te replien...
Ik ben ook geen alwetende, dus elke mening is goud waard.

disconnected

oke, I will try this first.

Duff_Man

most packard bell pc have a hidden partition with windows XP, when you boot up, hold f10 and try and reinstall

disconnected

aha, thanks!

I also found this:

System file checker
With the programm to check systemfiles. Withe the Windows XP install cd-rom you can check on damaged systemfiles and those will be replaced by correct ones from the Windows XP install cd-rom. In screen 'run' type sfc /scannow to start the process.

Is this also a possible solution?

Jamal

It might work, but you can't know untill you try

Let us know what you've tried and in which order and hopefully we can get a little wiser from that

Duff_Man

disconnected wrote:

aha, thanks!

I also found this:

System file checker
With the programm to check systemfiles. Withe the Windows XP install cd-rom you can check on damaged systemfiles and those will be replaced by correct ones from the Windows XP install cd-rom. In screen 'run' type sfc /scannow to start the process.

Is this also a possible solution?

might do the trick, but on some packard bell pcs some of the drivers etc are only on the packard bell install cd or partition, so you might have a problem with your drives etc if it isnt a packard bell cd

it is a bit of a shitter, let us know how you get on

disconnected

I haven't tried anything yet, but I found the eventlogfile:

=======================================

Type gebeurtenis: Fout
Bron van gebeurtenis: System Error
Categorie van gebeurtenis: (102)
Gebeurtenis-ID: 1003
Datum: 2-1-2007
Tijd: 18:15:12
Gebruiker: n.v.t.
Computer: SN034533220190
Beschrijving:
Foutcode; 00000019, parameter1: 00000020, parameter2: 82400350, parameter3: 82400378, parameter4: 0a05000a.

Zie Help en ondersteuning op http://go.microsoft.com/fwlink/events.asp voor meer informatie.
Gegevens:
0000: 74737953 45206d65 726f7272 72452020
0010: 20726f72 65646f63 30303020 31303030
0020: 50202039 6d617261 72657465 30302073
0030: 30303030 202c3032 30343238 30353330
0040: 3238202c 33303034 202c3837 35306130
0050: 61303030

=======================================

'Zie Help en ondersteuning op http://go.microsoft.com/fwlink/events.asp voor meer informatie' means See Help and support at http://go.microsoft.com/fwlink/events.asp for more information.

But after checking this event on this page there's nothing about error 1003 in Windows XP.......

parel jam

disconnected wrote:

I haven't tried anything yet, but I found the eventlogfile:

=======================================

Type gebeurtenis: Fout
Bron van gebeurtenis: System Error
Categorie van gebeurtenis: (102)
Gebeurtenis-ID: 1003
Datum: 2-1-2007
Tijd: 18:15:12
Gebruiker: n.v.t.
Computer: SN034533220190
Beschrijving:
Foutcode; 00000019, parameter1: 00000020, parameter2: 82400350, parameter3: 82400378, parameter4: 0a05000a.

Zie Help en ondersteuning op http://go.microsoft.com/fwlink/events.asp voor meer informatie.
Gegevens:
0000: 74737953 45206d65 726f7272 72452020
0010: 20726f72 65646f63 30303020 31303030
0020: 50202039 6d617261 72657465 30302073
0030: 30303030 202c3032 30343238 30353330
0040: 3238202c 33303034 202c3837 35306130
0050: 61303030

=======================================

'Zie Help en ondersteuning op http://go.microsoft.com/fwlink/events.asp voor meer informatie' means See Help and support at http://go.microsoft.com/fwlink/events.asp for more information.

But after checking this event on this page there's nothing about error 1003 in Windows XP.......

http://forum.sysinternals.com/forum_posts.asp?TID=9069

Het is iets met geheugenprobleem. Toevallig een blauw scherm gehad?

Jamal

parel jam wrote:

http://forum.sysinternals.com/forum_posts.asp?TID=9069

Het is iets met geheugenprobleem. Toevallig een blauw scherm gehad?

Run MemTest
it will clear out a couple of things

disconnected

I had no blue screen, but I run a memtest tomorrowmoring. That's my regular morning off. I will have the time then to take a good look at my system. I will let you now the results.

disconnected

I did a memtest this morning. When I tried to test 512 mb after 20 minutes the programm had tested 0.0%. If I tried to stop the process, the programm didn't respond anymore on my actions which made me stop the programm by using taskmanager.

When I tested 'All unused RAM' it went up to 539,4% after 25 minutes
no errors where found.

Any ideas?

disconnected

I used System Spec for info about my RAM. It says I have 512 MB physical and 256 flash rom, as a total of 768MB of memory. Besides that there is 2 GB virtual memory.

I have tested my mem with HeavyLoad (http://www.jam-software.com) and this is the screenshot: http://i97.photobucket.com/albums/l229/disconnected2006/HeavyLoad.jpg

As you can see there is 696MB allocated. The testing starts around 970 MB and the number goes down as an idiot. During the testing after a while it looks like he can't test lower then 100MB. It stays on 100MB. Is this maybe a sign I have a RAM memory problem?

Jamal

I honestly don't know what that might indicate :$

parel jam

Ik heb geen flauw idee. Wanneer ik computer problemen heb, dan check ik deze site altijd:

http://gathering.tweakers.net/

Zoekfunctie zit rechtsboven. Misschien heb je er wat aan.

Jamal

parel jam wrote:

Ik heb geen flauw idee. Wanneer ik computer problemen heb, dan check ik deze site altijd:

http://gathering.tweakers.net/

Zoekfunctie zit rechtsboven. Misschien heb je er wat aan.

tweakers is indeed a very good reference

you might also want to consider consulting http://www.ict-blue.be
That's a bb where most of the people in my school are (also the post-grads and teachers), you can always ask a question there.

verdomme, moet ik nu Engels of Nederlands babbelen? *confused*

disconnected

Thanks Jamal and Parel Jam! I'm gonna run some more test on my harddrive/memory and processor several times. If this doens't give any results, I will try those forums! I'll keep you guys updated for news....

RSS feeds? hehehehehe

disconnected

Still no restarts yet, even not after some stress tests..... I did found warnings about too many incoming and outgoing connections.... Maybe that can be the problem? Now I put a limit on incoming/outgoing connections and I will check if the warnings are still coming....