Turn on Pc and i get "No signal". Bios related?
Brisk.
Posts: 11,561
Just thought id post this incase anyone on the forum knows anything :P
Was on my pc and I thought i better update all my drivers for my pc, like audio, motherboard, bios etc. So i did that and restarted and from then onwards ive had nothing but trouble. First few times i reset the pc it would display no signal on my monitor, so i thought maybe it was just a bios **** up, so i reset the cmos about 2 or 3 times for whenever i wanted to use my pc. strangley enough i think it was whenever i wasn't on my pc for large amounts of time i had to reset it. But now i reset the cmos and my pc powers on but im getting nothing on the screen.
Power is getting to all my fans and hardrive, when i turn on my pc i dont get a beep and the hardrive light just flickers then nothing happens.
The monitor is not broken as i can play my xbox 360 on it and i really doubt my card is broken by just sitting in my machine, after all there is power in my card as the fan is spinning.
Ive tried just plugging in the vga cable and power, also with the cpu, memory and hardrive. Like the bare minimums and the same thing happens.
Maybe i need to leave the jumper on the cmos for longer? I tend to leave it on for 10-15mins.
baah this is so irritating, thanks for any help
:D
Ed
SPEC:
1 x Gigabyte Intel SKT775 965P-DS3 PCI-E SATAII 8Channel Audio Virtual Dual BIOS ATX 113820 Warehouse Invoiced Track £68.82 £68.82
1x Geforce 8500.
1 x Intel Core 2 Duo E6400 (2.13ghz) Socket 775 FSB1066 2MB Cache Retail Boxed Processor 112708 Warehouse Invoiced Track £123.43 £123.43
1 x Hiper 580W Type-M Black PSU - SLI Certified with APFC 109552 Warehouse Invoiced Track £44.89 £44.89
1 x Crucial 2GB kit (2x1GB) DDR2 667MHz/PC2-5300 Memory Non-ECC Unbuffered CL5 Lifetime Warranty 106133 Warehouse Invoiced Track £123.40 £123.40
1 x Casecom KB-7720BK Black ATX Midi Tower Case - No PSU
Was on my pc and I thought i better update all my drivers for my pc, like audio, motherboard, bios etc. So i did that and restarted and from then onwards ive had nothing but trouble. First few times i reset the pc it would display no signal on my monitor, so i thought maybe it was just a bios **** up, so i reset the cmos about 2 or 3 times for whenever i wanted to use my pc. strangley enough i think it was whenever i wasn't on my pc for large amounts of time i had to reset it. But now i reset the cmos and my pc powers on but im getting nothing on the screen.
Power is getting to all my fans and hardrive, when i turn on my pc i dont get a beep and the hardrive light just flickers then nothing happens.
The monitor is not broken as i can play my xbox 360 on it and i really doubt my card is broken by just sitting in my machine, after all there is power in my card as the fan is spinning.
Ive tried just plugging in the vga cable and power, also with the cpu, memory and hardrive. Like the bare minimums and the same thing happens.
Maybe i need to leave the jumper on the cmos for longer? I tend to leave it on for 10-15mins.
baah this is so irritating, thanks for any help
:DEd
SPEC:
1 x Gigabyte Intel SKT775 965P-DS3 PCI-E SATAII 8Channel Audio Virtual Dual BIOS ATX 113820 Warehouse Invoiced Track £68.82 £68.82
1x Geforce 8500.
1 x Intel Core 2 Duo E6400 (2.13ghz) Socket 775 FSB1066 2MB Cache Retail Boxed Processor 112708 Warehouse Invoiced Track £123.43 £123.43
1 x Hiper 580W Type-M Black PSU - SLI Certified with APFC 109552 Warehouse Invoiced Track £44.89 £44.89
1 x Crucial 2GB kit (2x1GB) DDR2 667MHz/PC2-5300 Memory Non-ECC Unbuffered CL5 Lifetime Warranty 106133 Warehouse Invoiced Track £123.40 £123.40
1 x Casecom KB-7720BK Black ATX Midi Tower Case - No PSU
Post edited by Unknown User on
0
Comments
I had a no signal problem last week and it turned out my memory had somehow come loose in the slot. I was able to figure this out by looking up what the motherboard beeps mean (on another computer of course). Your motherboard is not beeping at all?
Melissa
I thought updating firmware fixed things and made things more stable..
Ive just bought a new motherboard as i just cant get no Post bios beep, so im just come to the conclusion that its dead.