Home› Musicians and Gearheads

Guitar amp trouble

sonnysonny Posts: 132
edited April 2007 in Musicians and Gearheads
I have a Mesa Boogie Maverick 2x12 amp. I went turn it on a week ago, and the clean channel is really low in volume. I turned up the volume, master volume, etc. and the signal was barely coming through....i turned on the distorted channel and it was normal (very loud)...i thought it was the tubes so i put all new ones in but it didn't fix the problem. Any ideas? Any help would be of help.

Many thanks.
Sonny
Post edited by Unknown User on

Comments

  • NovawindNovawind Posts: 836
    Sounds like a bad solder somewhere, like a wire, transistor, or resistor has come loose somewhere inside the amp. I'd take it to a guitar tech or some other electronics repairman.
    If idle hands are the devil's workshop, he must not be very productive.

    7/9/06 LA 1
    7/10/06 LA 2
    10/21/06 Bridge 1
  • Indian SummerIndian Summer Posts: 2,296
    shoulda went with a peavy
    "It's all happening"
  • lucylespianlucylespian Posts: 2,403
    Call Mesa Boogie, they will help you out.
    Music is not a competetion.
Sign In or Register to comment.