My Pearl Jam Posters

Krysiewicz

DC 2008 Poster AMES

Halifax 2005 Ames Poster

VA Beach 2008 Kausen Poster

I also have a 06 Pittsburg Poster the one with the Typewriter/Robot face that is red and Black, But I don’t know what I should use for a matt if you have any Ideas Id love to hear them. Im also trying to get a DC 06 Poster I went to that show but I have had no luck at getting it! But tell me what you think about these posters

LukinFan

Krysiewicz wrote:

DC 2008 Poster AMES

Halifax 2005 Ames Poster

VA Beach 2008 Kausen Poster

I also have a 06 Pittsburg Poster the one with the Typewriter/Robot face that is red and Black, But I don’t know what I should use for a matt if you have any Ideas Id love to hear them. Im also trying to get a DC 06 Poster I went to that show but I have had no luck at getting it! But tell me what you think about these posters

wow! that was quick on the DC poster. Did you frame it yourself or send it off? If you did it yourself, could you give me some tips? cost?

evenflowman

LukinFan wrote:

wow! that was quick on the DC poster. Did you frame it yourself or send it off? If you did it yourself, could you give me some tips? cost?

Looks nice, go to micheals or Joanns u can usually get a 50% coupon in the mail and get a mat cutter. Mine was like 20 bucks. You can get a whole sheet of a mat for around 12.00 and can cut several out of it. I double matted my Aussie ones by justin hampton and framed them for 40 bucks each. They look awesome!!

LukinFan

evenflowman wrote:

Looks nice, go to micheals or Joanns u can usually get a 50% coupon in the mail and get a mat cutter. Mine was like 20 bucks. You can get a whole sheet of a mat for around 12.00 and can cut several out of it. I double matted my Aussie ones by justin hampton and framed them for 40 bucks each. They look awesome!!

Cool, thanks

Krysiewicz

oh I did all of them my self just today. OK ill try and tell you how to do it(total cost for DC 34.00 for matt and Frame)

First youll have to get a frame that is bigger than the poster, the Dc was 19x26, so I got a poster frame that was 22 by 28 (24.00 dollars at Michaels).

I got a blank matt (6.88 for a entire matt) this can be the hardest trying to find the color that matches

you then take the glass out of the frame and put it on top of the matt and you want to cut the entire matt to be the same size as the glass.

then you have to find the center from the matt so you measure down from the top to the bottom of the matt which is 22 inches so the center 11 and from right to left is 14.

you need the center so you can measure out from the mid point.

you then take you poster and you take a quarter inch from each side so that it lays on the poster. so this is what I did and if you want I can make a forum on how to do this so it makes sense with pictures.

the poster is 19 x 26 so from the mid point of the mark on the matt from side to side would be 19 inches from the poster so seeing as the half point on the matt is the mid section you take half of 19 and that is 8 and but as I said before you want the frame to lay on it so you actually would go into from the mid point 7 and 3 quarters to the left and right and the top you would go 12 and 3 quarters because a quarter inch more to lay on the poster.

you basically make marks on the matt and line it up and make a straight line up and down on the matt on all the sides you made your mark and then use a box cutter to cut it out.

This sounds hard but I swear Im no rocketscientist and each poster took about 20 mintues (the double matt took about 45 mintues) its super easy I can help you if you wanted me too. Each poster I got a qoute from michaels and too get framed amd matted by them was about 100 or more dollars. I swear its easy and worth it.

PM me if you got anymore questions